Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 683 of 1904 2022-03-04
Not Subject to NDA
3.6.29. AT#ISMSCFG - SMS Transport Configuration
This command changes the configuration parameter for outgoing SMS.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ISMSCFG=<mode>
Set command changes the configuration parameter for outgoing SMS,
which will be used to route the SMS either over CPS or over IMS (IP
Multimedia Core Network Subsystem).
Parameter:
Name
Type
Default
Description
<mode>
integer
1
configuration parameter for outgoing
SMS.
Values:
0
:
SMS service is not to be invoked over the IP networks
1
:
SMS service is preferred to be invoked over the IP
networks
Default value for ATT FW(NA, SA, NF-ATT), SoftBank and Vodafone
NZ FW is '0' and for the others is '1'.
Device reboot is needed all the time after changing <mode> value.
The current setting is stored in NVM.
AT#ISMSCFG?
Read command returns the current domain selected to route the outgoing
SMS in the format:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English