Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 760 of 1904 2022-03-04
Not Subject to NDA
3.8.28. AT#WLANMACDENY - Add/remove MAC address to/from deny list
This command is used to add/remove MAC address to/from deny list.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANMACDENY=<mode>,<mac_address>
Set command allows to add/remove MAC address to/from deny list.
Relevant for AP mode only.
Parameters:
Name
Type
Default
Description
<mode>
integer
N/A
Deny list mode
Values:
0
:
Remove from deny list
1
:
Add to deny list
<mac_address>
string
-
Mac address.
Note: Mac address should be
written with ':' between each Hexa
number.
Example:
00:A0:C6:00:00:17
AT#WLANMACDENY?
Read command returns the deny list.
AT#WLANMACDENY=?
Test command returns the supported range of values for parameters.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English