Telit Wireless Solutions LE910C series - AT#VAUX - Auxiliary Voltage Output Control

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1158 of 1904 2022-03-04
Not Subject to NDA
3.15.26. AT#VAUX - Auxiliary Voltage Output Control
This command configures the Auxiliary Voltage output pin.
[1] Hardware User's Guide of the used module
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Other
No
-
2
AT#VAUX=[<n>,<stat>]
Set command enables/disables the Auxiliary Voltage output pin. To have
information on VAUX pin refer to document [1].
Parameters:
Name
Type
Default
Description
<n>
integer
1
VAUX pin index
Value:
1
:
only one VAUX pin is available
<stat>
integer
1
Enable/disable VAUX output or get its status
Values:
0
:
disables output
1
:
enables output
2
:
gets current VAUX pin status
Additional info:
When <stat>=2 and command is successful, it returns:
#VAUX: <value>