Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 981 of 1904 2022-03-04
Not Subject to NDA
3.12.1.13. AT#SRSEXT - Select Ringer Sound Extended
This command used to set the specific ring sound from file system.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SRSEXT=<mode>[,<file_name>]
Set command sets the specific ring sound from file system.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
mode
Values:
0
:
mode off
1
:
mode on
<file_name>
string
-
Current ringing file name. Has a
maximum of 32 characters.
- When the command is issued with <mode>=1, the ringing tone is
stored as default ringing tone (AT#SRS is ignored).
- If command is issued with <mode>=0, default ring tone will set
according to AT#SRS.
- <file_name> parameter is mandatory if the <mode>=1 is issued,
but it has to be omitted for <mode>=0 is issued.
- <file_name> must be exists in APLAY folder (AT#ALIST).
- The setting is saved in NVM and available on following reboot.
AT#SRSEXT?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English