Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 889 of 1904 2022-03-04
Not Subject to NDA
3.10.15. AT#QSS - Query SIM Status
Query SIM Status.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#QSS=[<mode>]
Set command enables/disables the Query SIM Status unsolicited
indication in the ME. The format of the unsolicited indication is the
following:
#QSS: <status>
The parameter is described in the Unsolicited field section.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Type of notification
Values:
0
:
disabled. It is only possible to query the current SIM
status through read command AT#QSS?
1
:
enabled. The ME informs at every SIM status change
through the unsolicited indication where <status>
range is 0...1
2
:
enabled. The ME informs at every SIM status change
through the unsolicited indication where <status>
range is 0...3
Unsolicited field:
Name
Type
Description

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English