Telit Wireless Solutions LE910C series - AT$GPSELV - GNSS Minimum Elevation Level

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1703 of 1904 2022-03-04
Not Subject to NDA
3.28.1.20. AT$GPSELV - GNSS Minimum Elevation Level
This command set the GNSS minimum elevation level for SVs used in the position fix.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$GPSELV=<elevation>
Set command to configure the GNSS minimum elevation level for SVs used
in the position fix.
Parameter:
Name
Type
Default
Description
<elevation>
integer
5
GNSS minimum elevation level.
where, 0 is lowest elevation level and 90
is highest elevation level in degrees.
Value:
0÷90
:
GNSS minimum elevation level.
AT$GPSELV?
Read command returns the GNSS elevation level, in the format:
$GPSELV: <elevation>
AT$GPSELV=?
Test command returns the supported range of values for
parameter <elevation>.