Telit Wireless Solutions LE910C series - Http; AT#HTTPCFG - Configure HTTP Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1410 of 1904 2022-03-04
Not Subject to NDA
HTTP
3.20.1. AT#HTTPCFG - Configure HTTP Parameters
This command sets the parameters needed to the HTTP connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#HTTPCFG=<prof_id>[,<server_address>[,<server_port>[,<auth_type>[,<userna
me>
[,<password>[,<ssl_enabled>[,<timeout>[,<cid>[,<unused1>[,<unused2>]]]]]]]]]]
Sets the parameters needed to the HTTP connection
Parameters:
Name
Type
Defaul
t
Description
<prof_id>
intege
r
N/A
indicating the profile identifier
Value:
0÷2
:
Profile identifier
<server_addres
s>
string
-
IP address of the HTTP server. This
parameter can be either:
43. any valid IP address in the format:
"xxx.xxx.xxx.xxx"
44. any valid IPv6 address in one of the
following format:
"xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.
xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx"
"xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:x
xxx"
45. any host name to be solved with a
DNS query. Default:
"" for first and second profile