Telit Wireless Solutions LE910C series - AT#E2 SLRI - Socket Listen Ring Indicator

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1270 of 1904 2022-03-04
Not Subject to NDA
3.17.21. AT#E2SLRI - Socket Listen Ring Indicator
This command enables the Ring Indicator pin response to a Socket Listen connect.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Common
profile
No
-
2
AT#E2SLRI=[<n>]
Set command enables/disables the Ring Indicator pin response to a
Socket Listen connect and, if enabled, the duration of the negative going
pulse generated on receipt of connect.
Parameter:
Name
Type
Default
Description
<n>
integer
0
RI enabling
Values:
0
:
RI disabled for Socket Listen connect
50÷1150
:
RI enabled for Socket Listen connect; a negative
going pulse is generated on receipt of connect
and <n> is the duration in ms of this pulse
AT#E2SLRI?
Read command reports whether the Ring Indicator pin response to a
Socket Listen connect is currently enabled or not, in the format:
#E2SLRI: <n>
AT#E2SLRI=?