Telit Wireless Solutions LE910C series - AT#ATDELAY - at Command Delay

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 213 of 1904 2022-03-04
Not Subject to NDA
3.2.2.58. AT#ATDELAY - AT Command Delay
This command sets a delay in second for the execution of successive AT command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#ATDELAY=<delay>
Set command sets a delay in second for the execution of successive AT
command.
Parameter:
Name
Type
Default
Description
<delay>
integer
0
delay interval
Value:
0÷max
:
delay expressed in 100 milliseconds intervals; 0
means no delay. For max value refer to test
command
<delay> is only applied to first command executed after #ATDELAY
AT#ATDELAY?
Read command reports the currently selected parameter in the format:
#ATDELAY: <delay>
AT#ATDELAY=?
Test command returns the supported range of values for parameter
<delay>.