Telit Wireless Solutions LE910C series - AT+CGQMIN - Quality of Service Profile (Minimum Acceptable)

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 789 of 1904 2022-03-04
Not Subject to NDA
3.9.9. AT+CGQMIN - Quality of Service Profile (Minimum Acceptable)
Set command allows to specify a minimum acceptable profile which is checked by the
terminal against the negotiated profile returned in the Activate PDP Context Accept
message.
3GPP TS 27.007
3GPP TS 03.060
3GPP TS 23.060
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGQMIN=[<cid>[,<precedence>[,<delay>[,<reliability>[,<peak>[,<mean>]]]]]]
Parameters:
Name
Type
Default
Description
<cid>
integer
-
PDP context identification (see
+CGDCONT command)
<precedence>
integer
0
precedence class
Value:
0÷max
:
use test command to know the values
range
<delay>
integer
0
delay class
Value:
0÷max
:
use test command to know the values
range
<reliability>
integer
0
reliability class