Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1540 of 1904 2022-03-04
Not Subject to NDA
3.23.9. AT#TCPATCMDSEQ - TCP AT Run Command Sequence
This command enables/disables, for TCP Run AT service, a feature that allows giving
more than one AT command without waiting for responses.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#TCPATCMDSEQ=<mod>
Set command enable/disable, for TCP Run AT service, a feature that
allows giving more than one AT command without waiting for responses.
It does not work with commands that uses the prompt '>' to receive the
message body text (e.g. “at+cmgs”, “at#semail”)
Parameter:
Name
Type
Default
Description
<mod>
integer
0
current mode for TCP Run AT feature for
multiple commands
Values:
0
:
service disabled
1
:
service enabled
AT#TCPATCMDSEQ?
Read command returns the current settings of parameters in the format:
#TCPATCMDSEQ: <mod>
AT#TCPATCMDSEQ=?
Test command returns the supported values for the TCPATCMDSEQ
parameters.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English