Telit Wireless Solutions LE910C series - File System; AT#WSCRIPT - Write File

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1768 of 1904 2022-03-04
Not Subject to NDA
File System
3.31.1. AT#WSCRIPT - Write File
Write user file into File system
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#WSCRIPT=[<script_name>[,<size>[,<hidden>]]]
Set command store a file in user NVM , naming it <script_name>
The device shall prompt five characters sequence
<CR><LF><greater_than><greater_than><greater_than> (IRA 13, 10, 62,
62, 62)
after command line is terminated with <CR>; after that a file can be
entered from TE, sized <size> bytes.
The operations complete when all the bytes are received.
If writing ends successfully, the response is OK; otherwise an error code is
reported.
Parameters:
Name
Type
Default
Description
<script_name>
string
-
name of the file in NVM, string type
(max 127chars, case sensitive)
<size>
integer
-
file size in bytes
<hidden>
integer
0
file hidden attribute
Values: