Telit Wireless Solutions LE910C series - AT#WLANINDI - Enable;Disable WLAN Unsolicited Message

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 735 of 1904 2022-03-04
Not Subject to NDA
3.8.15. AT#WLANINDI - Enable/disable WLAN unsolicited message
This command is used to enable/disable WLAN unsolicited message.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANINDI=<state>
Set command is used to enable/disable WLAN unsolicited message.
Parameter:
Name
Type
Default
Description
<state>
integer
0
Status mode
Values:
0
:
Disable (factory default)
1
:
Enable
Need to be saved on profiles.
AT#WLANINDI?
Read command returns the current WLAN status in the format:
#WLANINDI: <state>
Where:
<state>
0 - OFF
1 - ON