Telit Wireless Solutions LE910C series - AT#IMSPDPSET - Sets IMS Pdp APN Name

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 252 of 1904 2022-03-04
Not Subject to NDA
3.2.2.81. AT#IMSPDPSET - sets IMS Pdp APN Name
This command sets IMS Pdp APN Name. This name should be one of the APN names set
in +CGDCONT command and appropriated context will be opened for IMS.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#IMSPDPSET=<pdpApnName>
This command sets IMS Pdp APN Name.
This name should be one of the APN names set in +CGDCONT command
and appropriated context will be opened for IMS.
Parameter:
Name
Type
Default
Description
<pdpApnName>
string
-
from 1 to 32 symbols ANSI fixed
string.
Can be used with or without quotes.
AT#IMSPDPSET?
Read command reports existing IMS Pdp APN Name in format:
#IMSPDPSET: ims