Telit Wireless Solutions LE910C series - AT#EUSER - E-Mail Authentication User Name

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1402 of 1904 2022-03-04
Not Subject to NDA
3.19.9. AT#EUSER - E-mail Authentication User Name
This command sets the user identification string to be used during the SMTP
authentication step.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT#EUSER=[<eUser>]
Parameter:
Name
Type
Default
Description
<eUser>
string
""
string containing the e-mail authentication
User ID
Value:
""
:
factory default
If no authentication is required then the <eUser> parameter must
be the empty string "".
AT#EUSER?
Read command returns the value of the current user identification string
<e-user>, in the format:
#EUSER: <eUser>
AT#EUSER=?
Test command returns the maximum allowed length of the string
parameter <eUser>