Telit Wireless Solutions LE910C series - AT#BREAD - BLE Read

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1840 of 1904 2022-03-04
Not Subject to NDA
3.35.6. AT#BREAD - BLE Read
This command is used to read the BLE characteristics value of a service.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#BREAD=<Connection Handle>,<Characteristic Handle>
Set command is used to read the characteristics value of a service.
Parameters:
Name
Type
Default
Description
<Connection
Handle>
hex
N/A
It specifies the connection handle
returned during BLE connect
command.
Value:
0x1÷0xFFFF
:
The supported parameter value
range.
<Characteristic
Handle>
hex
N/A
It specifies the characteristic
handle returned during service
discovery.
Value:
0x1÷0xFFFF
:
The supported parameter value
range.
AT#BREAD=?
Test command reports supported range of values for all parameters.