Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1443 of 1904 2022-03-04
Not Subject to NDA
3.21.8. AT#SSLI - Secure Socket Info
This command is used to get information about secure socket data traffic.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SSLI[=<SSId>]
Execution command is used to get information about secure socket data
traffic.
The response is in the format:
#SSLI:
<SSId>,<DataSent>,<DataRecv>,<PendingData>,<TCPConnWaitingAck>
Parameter:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
only one SSL socket is available
Additional info:
Parameters returned by the response message and not described in
the previous sections.
Name
Type
Default
Description
<DataSent>
integer
-
total amount (in bytes)
of data sent to the
TLS/SSL connection
since the beginning of
the connection itself
(obviously: not yet

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English