Telit Wireless Solutions LE910C series - AT+CSIL - Silence Command

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 966 of 1904 2022-03-04
Not Subject to NDA
3.12.1.5. AT+CSIL - Silence Command
This command enables the silent mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CSIL=[<n>]
Set command enables/disables the silent mode. When the phone is in
silent mode, all signalling tones from MT are suppressed.
Parameter:
Name
Type
Default
Description
<n>
integer
0
enables/disables the silent mode
Values:
0
:
disable
1
:
enable
AT+CSIL?
Read command returns the current value of the parameter <n> in the
format:
+CSIL: <n>
AT+CSIL=?
Test command returns the supported values of parameter <n>.