Telit Wireless Solutions LE910C series - AT+CIREG - IMS Registration State

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1765 of 1904 2022-03-04
Not Subject to NDA
3.30.2. AT+CIREG - IMS registration state
This command controls the presentation of an unsolicited result code.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CIREG=[<mode>]
Set command controls the presentation of an unsolicited result code when
there is a change in the MT's IMS registration information.
Unsolicited result code has the following format:
+CIREGU: <reg_info>[,<ext_info>]
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Enables or disables reporting of changes in
the MT's IMS registration information.
Values:
0
:
disable reporting (default)
1
:
enable reporting (parameter <reg_info>)
2
:
enable extended reporting (parameters <reg_info>
and <ext_info>)
Unsolicited fields:
Name
Type
Description
<reg_info>
integer
Indicates the IMS registration status. The UE is
seen as registered as long as one or more of its