Telit Wireless Solutions LE910C series - AT#SIMDET - SIM Detection Mode

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 929 of 1904 2022-03-04
Not Subject to NDA
3.10.32. AT#SIMDET - SIM Detection Mode
This command manages the SIM detection mode.
[1] Telit Hardware Design Guide of the used module.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SIMDET=<mode>
Set command simulates the SIM status or selects the automatic SIM
detection status. This command is used by modules providing the
dedicated SIMIN pin. Refer to document [1] to have information on
dedicated SIMIN pin.
Parameter:
Name
Type
Default
Description
<mode>
integer
2
SIM detection mode
Values:
0
:
ignore dedicated SIMIN pin and simulate the status
"SIM Not Inserted"
1
:
ignore dedicated SIMIN pin and simulate the status
"SIM Inserted"
2
:
automatic SIM detection using dedicated SIMIN Pin