Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 737 of 1904 2022-03-04
Not Subject to NDA
3.8.16. AT#ISEL - Send command via cellular modem or Linux processor
This command directs the WE866Cx Connection Manager to send command via cellular
modem or Linux processor.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ISEL=<mode>
Set command directs the WE866Cx Connection Manager to send AT
commands and data either via a cellular modem or a Linux processor.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Mode
Values:
0
:
Executes the AT commands and transmit the data via
Cellular modem processor
1
:
Executes the AT commands and transmit the data via
Linux Network Stack.
Additional info:
When AT#ISEL=1 is issued, the following socket AT commands are
executed in WE866Cx Connection Manager:
#SS
#SI
#ST
#SD
#SSEND
#SH

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English