Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1164 of 1904 2022-03-04
Not Subject to NDA
3.15.29. AT#QTEMP - Query Temperature Overflow
This command returns if the device internal temperature is in the working range or not.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#QTEMP=[<mode>]
Set command has currently no effect. The interpretation of parameter
<mode> currently not implemented. The value assigned to it will simply
have no effect.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
mode
Value:
0
:
returns "OK"
AT#QTEMP?
Read command queries the device internal temperature sensor for over
temperature and reports the result in the format:
#QTEMP: <temp>
where:
<temp> - over temperature indicator
0 - The device temperature is in the working range.
1 - The device temperature is out of the working range.
See note for working range definition.
AT#QTEMP=?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English