Telit Wireless Solutions LE910C series - AT#MWI - Message Waiting Indication

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 169 of 1904 2022-03-04
Not Subject to NDA
3.2.2.38. AT#MWI - Message Waiting Indication
This command enables/disables the presentation of the Message Waiting Indicator
(MWI) URC.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT#MWI=[<enable>]
Set command enables/disables the presentation of the Message Waiting
Indicator URC, it can have two formats, as show in Additional info.
Parameter:
Name
Type
Default
Description
<enable>
integer
1
enables/disables the presentation of the
#MWI: URC
Values:
0
:
disables the presentation of the #MWI: URC
1
:
enables the presentation of the #MWI: URC, see
Additional info.
Additional info:
If AT#MWI=1 has been entered, the #MWI: URC is displayed each
time.
- A new message waiting indicator is received from the network, the
URC format is:
#MWI: <status>,<indicator>[,<count>]