Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1601 of 1904 2022-03-04
Not Subject to NDA
FOTA & OMA
3.26.1. FOTA Legacy
3.26.1.1. AT#OTAUPW - OTA Delta Write
Execution command starts injection of a delta file into the device.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#OTAUPW=[<param1>]
This command will only write the file to the device to be ready for
installation.
In order to install the delta file, you have to send the command #OTAUP.
You can send #OTAUPW with or without <param1> parameter.
Once received the command #OTAUPW, the device prints the "CONNECT"
reply wait for data to received.
Parameter:
Name
Type
Default
Description
<param1>
integer
0
LE910Cx Linux:
size in bytes of data to be
injected
LE910Cx ThreadX:
verbose level
Values:
0
:
hash mark printing disabled during injection,
(LE910Cx ThreadX only)

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English