Telit Wireless Solutions LE910C series - AT+CEDRXRDP - Edrx Read Dynamic Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 473 of 1904 2022-03-04
Not Subject to NDA
3.4.36. AT+CEDRXRDP - eDRX Read Dynamic Parameters
This command returns a message related to Extended Discontinuous Reception (eDRX).
3GPP TS 27.007
3GPP TS 24.008
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CEDRXRDP
Execution command returns the following message if eDRX is used for
the cell that the MS is currently registered to, in the format:
+CEDRXRDP: <AcT-type>[,<Requested_eDRX_value>[,<NWprovided_
eDRX_value>[,<Paging_time_window>]]]
If the cell that the MS is currently registered to is not using eDRX,
<AcTtype>=0 is returned.
Additional info:
Here is the list of the meanings of the parameter returned by the
+CEDRXRDP command.
Name
Type
Default
Description
<AcTtype>
integer
0
type of access
technology.
Values:
0
:
access technology is not
using eDRX