Telit Wireless Solutions LE910C series - AT+CGQREQ - Quality of Service Profile (Requested)

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 776 of 1904 2022-03-04
Not Subject to NDA
3.9.5. AT+CGQREQ - Quality of Service Profile (Requested)
Set command allows to specify a Quality of Service Profile (requested) that is used when
the terminal sends an Activate PDP Context Request message to the network. It
specifies a profile for the context identified by the (local) context identification
parameter, <cid>.
3GPP TS 27.007
3GPP TS 03.060
3GPP TS 23.060
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGQREQ=[<cid>[,<precedence>[,<delay>[,<reliability>[,<peak>[,<mean>]]]]]]
Parameters:
Name
Type
Default
Description
<cid>
integer
-
PDP context identification (see
+CGDCONT command).
<precedence>
integer
0
precedence class
Value:
0÷max
:
use test command to know the values
range
<delay>
integer
0
delay class
Value:
0÷max
:
use test command to know the values
range
<reliability>
integer
0
reliability class