Telit Wireless Solutions LE910C series - AT#SIMPR - SIM Presence Status

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 887 of 1904 2022-03-04
Not Subject to NDA
3.10.14. AT#SIMPR - SIM Presence Status
The command enables/disables the SIM presence status unsolicited indication.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#SIMPR=[<mode>]
Set command enables/disables the SIM presence status unsolicited
indication in the ME. This command reports also the status of the remote
SIM, if the SIM Access Profile (SAP) functionality is supported and has
been enabled by AT#RSEN command.
If notification is enabled, the ME informs about every (local and remote)
SIM status changes through the following URC:
#SIMPR: <SIM>,<status>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
notification type
Values:
0
:
disabled
1
:
enabled
Unsolicited fields:
Name
Type
Description
<SIM>
integer
local or remote SIM
Values:
0
:
local SIM
1
:
remote SIM