Telit Wireless Solutions LE910C series - AT#NASC - Non-Access-Stratum Compliancy

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 513 of 1904 2022-03-04
Not Subject to NDA
3.4.50. AT#NASC - Non-Access-Stratum compliancy
This command allows to selects NAS compliancy.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#NASC=[<mode>]
Set command allows to selects NAS compliancy.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
NAS specification-compliant
Values:
0
:
Forces UE to be Release 99 NAS specification -
compliancy.
1
:
Forces UE to be Release 5 NAS specification -
compliancy.
2
:
Forces UE to be Release 6 NAS specification -
compliancy.
3
:
Forces NAS to comply with 3GPP Release 7.
4
:
Forces NAS to comply with 3GPP Release 10.
5
:
Forces NAS to comply with 3GPP Release 11.
Need to power cycle the unit for the setting to take effect.
The mode is saved into the NVM.