Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 678 of 1904 2022-03-04
Not Subject to NDA
3.6.27. AT#SMSMOVE - Move Short Message to other Memory
This command moves selected Short Message from current memory to destination
memory.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SMSMOVE=<index>
Execution command moves selected Short Message from current memory
to destination memory.
Parameter:
Name
Type
Default
Description
<index>
string
-
message index in the memory selected by
+CPMS command. It can have values form 1
to N, where N depends on the available
space, see +CPMS.
If the destination memory is full, an error is returned.
AT#SMSMOVE?
Read command reports the message storage status of the current
memory and the destination memory in the format:
#SMSMOVE:<curr_mem>,<used_curr_mem>,<total_curr_mem>,
<dest_mem>,<used_dest_mem>,<total_dest_mem>
Additional info:
Parameters:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English