Telit Wireless Solutions LE910C series - AT#ECMC - ECM Configure

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1197 of 1904 2022-03-04
Not Subject to NDA
3.16.1.2. AT#ECMC - ECM Configure
The command manages the Ethernet control Model session.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#ECMC=<DId>,<parId>,<par>
This command configures an Ethernet Control Model (ECM) session.
Parameters:
Name
Type
Default
Description
<DId>
integer
0
device id.
Value:
0
:
currently there is just one valid value
<parId>
integer
N/A
parameter id
Values:
0
:
custom address
1
:
custom mask
2
:
custom gateway
3
:
custom dns 1
4
:
custom dns 2
5
:
device name
<par>
string
-
a valid parameter value
Additional info: