Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1345 of 1904 2022-03-04
Not Subject to NDA
3.17.52. AT#NWDNS - DNS from Network
The command allows to get the primary and secondary DNS addresses for selected GSM
or PDP context identifiers
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#NWDNS=[<cid>[,<cid>[,…]]]
Execution command returns either the primary and secondary DNS
addresses for the GSM context (if specified) and/or a list of primary and
secondary DNS addresses for the specified PDP context identifiers.
Parameter:
Name
Type
Default
Description
<cid>
integer
N/A
numeric parameter which specifies a
particular PDP context definition
The value of max is returned by the test
command.
Value:
1÷max
:
specifies a particular PDP context definition (see
+CGDCONT command).
Additional info:
The command returns only one row of information for every
specified <cid>, even if the same <cid> is present more than once.
The command returns a row of information for every specified <cid>
whose context has been already defined. No row is returned for a
<cid> whose context has not been defined yet.
Response format is:
#NWDNS: <cid>,<PDNSaddress>,<SDNSaddress>[<CR><LF>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English