Telit Wireless Solutions LE910C series - AT#BADVINTMIN - BLE Minimum Advertising Interval

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1874 of 1904 2022-03-04
Not Subject to NDA
3.35.21. AT#BADVINTMIN - BLE Minimum Advertising Interval
This command is used to configure the minimum advertisement interval.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#BADVINTMIN=<Minimum Advertising Interval>
Set command is used to configure the minimum advertisement interval for
a Bluetooth Low Energy peripheral.
Parameter:
Name
Type
Default
Description
<Minimum
Advertising
Interval>
integer
N/A
It specifies minimum interval used
for advertising (in milliseconds) in a
Bluetooth Low Energy peripheral.
Value:
20÷10240
:
The supported parameter value
range. This value can be saved into
profile through AT#W command.
AT#BADVINTMIN?
Read command is used to get the status of the minimum advertising
interval:
#BADVINTMIN: <Minimum Advertising Interval>
Where,
<Minimum Advertising Interval> - Specifies the minimum advertising
interval. For example:
AT#BADVINTMIN?
#BADVINTMIN: 100
OK