Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 284 of 1904 2022-03-04
Not Subject to NDA
3.2.4. DTE - Modem Interface Control
3.2.4.1. ATE - Command Echo
This command allows to enable or disable the command echo.
ITU-T Recommendation V.25 ter
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATE[<n>]
The execution command allows to enable/disable the command echo.
Parameter:
Name
Type
Default
Description
<n>
integer
1
Configuration value
Values:
0
:
disables command echo
1
:
enables command echo, hence command sent to the
device are echoed back to the DTE before the response
is given.
If parameter is omitted, the command has the same behavior of
ATE0

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English