Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 190 of 1904 2022-03-04
Not Subject to NDA
3.2.2.48. AT#PSMRI - Power Saving Mode Ring Indicator
The command enables or disables the Ring Indicator pin response to an URC message
while modem is in power saving mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Common
profile
No
-
2
AT#PSMRI=<n>
Set command enables/disables the Ring Indicator pin response to an URC
message while modem is in power saving mode. If enabled, a negative
going pulse is generated, when URC message for specific event is invoked.
The duration of this pulse is determined by the value of <n>.
Parameter:
Name
Type
Default
Description
<n>
integer
0
disables, enables/sets duration of the
generated pulse.
Values:
0
:
disables RI pin response for URC message
50÷1150
:
enables RI pin response for URC messages with
a duration specified in ms
the behavior for #PSMRI is invoked only when modem is in sleep
mode (AT+CFUN=5 and DTR Off on Main UART).
AT#PSMRI?
Read command reports the duration in ms of the pulse generated, in the
format:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English