3.22.15. AT#CSURVCL - Network Survey with only LTE (Numeric Format)
The command allows to perform a network survey through band channels with only
LTE.(Numeric Format)
AT#CSURVCL[=[<s>,<e>]]
Execution command allows to perform a quick survey through channels belonging
to the band selected by last #BND command issue, starting from channel <s> to
channel <e>. Issuing AT#CSURVCL<CR>, a full band scan is performed.
After issuing the command the device responds with the string:
Network survey started...
and, after a while, a list of information, one for each received carrier, is reported.
The #CSURVCL output ends in two ways, depending on the last #CSURVF setting:
if #CSURVF=0 or #CSURVF=1
The output ends with the string:
Network survey ended
if #CSURVF=2
the output ends with the string:
Network survey ended (Carrier: <NoARFCN> BCCh: <NoBCCh>)
Where:
<NoARFCN> - number of scanned frequencies
<NoBCCH> - number of found BCCh
Parameters:
To Next Page
Loading...
Need help?
General
