Telit Wireless Solutions LE910C series - AT$SUPLV - Set the Version of the Supported SUPL

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1683 of 1904 2022-03-04
Not Subject to NDA
3.28.1.10. AT$SUPLV - Set the Version of the Supported SUPL
This command configures the version of supported SUPL.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$SUPLV=<version>
Set command configures the version of supported SUPL.
Parameter:
Name
Type
Default
Description
<version>
integer
2
set the SUPL version.
Values:
0
:
N/S SUPL
1
:
SUPL 1.0
2
:
SUPL 2.0
AT$SUPLV?
Read command returns the SUPL version, in the format:
$SUPLV: x.y
Where "x.y" is the string corresponding to currently set version, or "0.0" if
version has not been set yet.
AT$SUPLV=?