Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1727 of 1904 2022-03-04
Not Subject to NDA
3.28.3.5. AT$GPSAV - GPS Antenna Supply Voltage Readout
This command returns the measured GPS antenna's supply voltage.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT$GPSAV
Execution command returns the measured GPS antenna's supply voltage
in mV.
AT$GPSAV?
Read command has the same meaning as the execution command.
AT$GPSAV=?
Test command returns the OK result code
This command has no real meaning. It exists for backward compatibility.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English