Telit Wireless Solutions LE910C series - AT#HSEN - Hot-Swap Enable

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 898 of 1904 2022-03-04
Not Subject to NDA
3.10.19. AT#HSEN - Hot-Swap Enable
This command enables/disables the hot-swap function.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#HSEN=<mode>
Set command enables/disables the hot-swap function.
Parameter:
Name
Type
Default
Description
<mode>
integer
1
hot-swap mode
Values:
0
:
disable
1
:
enable
AT#HSEN?
Read command reports the hot-swap status, in the format:
#HSEN: <mode>
AT#HSEN=?
Test command reports the supported range of values for parameter
<mode>.