Telit Wireless Solutions LE910C series - AT#CODECINFO - Codec Information

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 409 of 1904 2022-03-04
Not Subject to NDA
3.4.16. AT#CODECINFO - Codec Information
This command returns information about the channels codecs.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#CODECINFO[=<format>[,<mode>]]
This command is both a set and an execution command.
Set command enables/disables codec information reports depending on
the parameter <mode>, in the specified <format>.
Set command format:
AT#CODECINFO=<format>,<mode>
Execution command format:
AT#CODECINFO
Parameters:
Name
Type
Default
Description
<format>
integer
0
select the return information format:
numeric or textual
Values:
0
:
numeric format, see info section
1
:
textual format, see info section
<mode>
integer
0
enable/disable unsolicited channels
codecs information
Values:
0
:
disable codec information unsolicited report, see info
section