Telit Wireless Solutions LE910C series - AT#WLANBROADCAST - Enable;Disable Broadcast

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 716 of 1904 2022-03-04
Not Subject to NDA
3.8.2. AT#WLANBROADCAST - Enable/disable broadcast
This command is used to enable/disable broadcast.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANBROADCAST=<mode>
Set command is used to enable/disable broadcast.
Parameter:
Name
Type
Default
Description
<mode>
integer
N/A
Status mode
Values:
0
:
Enable broadcast
1
:
Disable broadcast
AT#WLANBROADCAST?
Read command returns the current broadcast status in the format:
#WLANBROADCAST: <mode>
Where:
<mode>
0 - Enable broadcast
1 - Disable broadcast
AT#WLANBROADCAST=?