Telit Wireless Solutions LE910C series - AT#SKTTO - Socket Inactivity Time-Out

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1343 of 1904 2022-03-04
Not Subject to NDA
3.17.51. AT#SKTTO - Socket Inactivity Time-Out
The command sets the timeout on no data exchanging on the socket.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SKTTO=[<tout>]
Set command sets the maximum time with no data exchanging on the
socket that the module awaits before closing the socket and deactivating
the GPRS context.
Parameter:
Name
Type
Default
Description
<tout>
integer
90
socket inactivity time-out in seconds units
Values:
0
:
no time-out
1÷65535
:
time-out in seconds
this time-out applies when no data exchanged in the socket for a
long time and therefore the socket connection automatically closed
and the GPRS context deactivated.
AT#SKTTO?
Read command reports the current "socket inactivity time-out value".
AT#SKTTO=?
Test command returns the allowed values for parameter <tout>.