Telit Wireless Solutions LE910C series - AT$LTC - LCS Certificate

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1663 of 1904 2022-03-04
Not Subject to NDA
3.28.1.4. AT$LTC - LCS Certificate
This command is used to pass the security objects (e.g. certificate, key) to the Transport
Layer Security Protocol, via binary string.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$LTC=<string>,<total_message_length>,<seq_no>,<security_object_type>
Set command is used to pass the security objects (e.g. certificate, key) to the
Transport Layer Security Protocol (binary string). The certificate shall be in
hexadecimal format (each octet of the certificate is given as two IRA
character long hexadecimal number).
Parameters:
Name
Type
Default
Description
<string>
string
-
string certificate segment.
The maximum value of
accepted characters is 300
characters per segment.
<total_message_length>
integer
N/A
total certificate size to be
received
Value:
1÷4096
:
overall number of Certificate
characters
<seq_no>
integer
N/A
sequence number of the
segment
Value:
1÷13
:
sequence number
<security_object_type>
integer
0
security object typology.
Value: