Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1759 of 1904 2022-03-04
Not Subject to NDA
3.29.2. AT#PSMWDISACFG - Power Saving mode configuration
This command used to configure power saving mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#PSMWDISACFG=<mode>
Set command configures power saving mode.
Parameter:
Name
Type
Default
Description
<mode>
integer
2
Low Power Mode
Values:
1
:
power saving mode by W_DISABLE_N pin
2
:
ignore change on W_DISABLE_N pin
3
:
low power mode by W_DISABLE_N pin
Additional info:
When <mode> is set to 1 or 3, W_DISABLE_N(GPIO8) is set as input
and sense it continuously.
If W_DISABLE_N is asserted to low (means GPIO8 changed to high),
modem is entered to PSM/LPM mode and USB VBUS is
disconnected(GPIO10 goes to low).

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English