Telit Wireless Solutions LE910C series - AT#TCPATRUNFRWL - TCP at Run Firewall List

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1533 of 1904 2022-03-04
Not Subject to NDA
3.23.5. AT#TCPATRUNFRWL - TCP AT Run Firewall List
This command controls the internal firewall settings for the TCPATRUN connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#TCPATRUNFRWL=<action>,<ip_addr>,<net_mask>
Set command controls the internal firewall settings for the TCPATRUN
connection.
Parameters:
Name
Type
Default
Description
<action>
integer
N/A
command action
Values:
0
:
remove selected chain
1
:
add an ACCEPT chain
2
:
Remove all chains (DROP everything); <ip_addr>
and <net_mask> has no meaning in this case.
<ip_addr>
string
-
remote address to be added into the
ACCEPT chain; string type, it can be any
valid IP address in the format:
xxx.xxx.xxx.xxx
<net_mask>
string
-
mask to be applied on the <ip_addr>.
Refer to additional info for more detail.
Additional info:
<net_mask> - mask to be applied on the <ip_addr>; string type, it
can be any valid IP address mask in the format: xxx.xxx.xxx.xxx
Command returns OK result code if successful.