Telit Wireless Solutions LE910C series - AT$SUPLSEC - Set the User Plane Secure Transport

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1691 of 1904 2022-03-04
Not Subject to NDA
3.28.1.15. AT$SUPLSEC - Set the User Plane Secure Transport
This command configures the User Plane Secure Transport
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$SUPLSEC=<option>
Set command configures the User Plane Secure Transport
Parameter:
Name
Type
Default
Description
<option>
integer
1
enables/disables User Plane Secure
Transport.
Values:
0
:
disable
1
:
enable
AT$SUPLSEC?
Read command returns the currently used values, in the format:
$SUPLSEC: <option>
AT$SUPLSEC=?
Test command returns the supported range of values of parameters
<option>.
$SUPLSEC: (0-1)