Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 374 of 1904 2022-03-04
Not Subject to NDA
3.4.4. AT+CLCK - Facility Lock/Unlock
This command is used to lock, unlock, or interrogate a MT or a network facility.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CLCK=<fac>,<mode>[,<passwd>[,<class>]]
Set command is used to lock, unlock, or interrogate a MT or a network
facility.
Parameters:
Name
Type
Default
Description
<fac>
string
N/A
facility
Values:
"AB"
:
All Barring services (applicable only for
<mode>=0)
"AC"
:
All inComing barring services (applicable only
for <mode>=0)
"AG"
:
All outGoing barring services (applicable only for
<mode>=0)
"AI"
:
BAIC (Barr All Incoming Calls)
"AO"
:
BAOC (Barr All Outgoing Calls)
"IR"
:
BIC-Roam (Barr Incoming Calls when Roaming
outside the home country)
"OI"
:
BOIC (Barr Outgoing International Calls)

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English