Telit Wireless Solutions LE910C series - AT#CLSMK - Control Classmark2 Parameter

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 543 of 1904 2022-03-04
Not Subject to NDA
3.4.62. AT#CLSMK - Control Classmark2 parameter
This command set command Classmark2 parameters used Uplink signal message.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#CLSMK=<idx>,<val>
Set command Classmark2 parameters used Uplink signal message.
Parameters:
Name
Type
Default
Description
<idx>
integer
N/A
Parameter index
Values:
0
:
Restore to default values
1
:
Classmark 3 Indicator
2
:
CM Service Prompt
3
:
Short Message Capability
4
:
Pseudo Synchronization Capability
5
:
Controlled Early Classmark Sending(ES_IND)
6
:
SS Screening Indicator
7
:
LCS VA Capability(LCS_VAC)
<val>
integer
N/A
value
Values:
0
:
Disable
1
:
Enable