Telit Wireless Solutions LE910C series - Page 544

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 544 of 1904 2022-03-04
Not Subject to NDA
The values are depending on GSM support.
After execution, module must be reset.
Otherwise, a module doesn't work by changed value.
When <idx> is 0, <val> has no effect. (dummy value)
AT#CLSMK?
Read command reports the <val> for each <idx>.
AT#CLSMK=?
Test command reports the ranges of the parameters <idx> and <val>.