Telit Wireless Solutions LE910C series - AT#ECTD - Enhanced Call Tone Disable

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 94 of 1904 2022-03-04
Not Subject to NDA
3.1.14. AT#ECTD - Enhanced call tone disable
This command sets to disable related with call tone according to <type> parameter.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#ECTD=[<type>]
Set command sets to disable related with call tone according to <type>
parameter.
Parameter:
Name
Type
Default
Description
<type>
integer
0
representing a type of call tones which the
command refers to
Values:
0
:
Not disable call tones (default)
1
:
Call end tone
AT#ECTD?
Read command returns the current type of disabled call tone:
#ECTD: <type>
AT#ECTD=?
Test command reports the range for the parameter <type>