Telit Wireless Solutions LE910C series - AT#ETHMODE - Change Ethernet Mode

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1095 of 1904 2022-03-04
Not Subject to NDA
3.15.4. AT#ETHMODE - Change Ethernet Mode
Set command changes the ETH mode
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
Yes
-
2
AT#ETHMODE=<mode>
Set command changes the ETH mode
Parameter:
Name
Type
Default
Description
<mode>
integer
0
ETH mode
Values:
0
:
LAN mode
1
:
WAN mode
If #ETHEN is set to 1 or 2, the command return ERROR.
If #WLANMODE is set to 1 or 2, this command should not be set as
WAN mode.
AT#ETHMODE?
Read command returns the current mode status
AT#ETHMODE=?
Test command returns the range of supported values for all the
parameters